Midas HD96-24-CC-TP User Manual

139 HD96-24-CC-TP User Manual
Item Control Function
30 Lo Cut (Colour) Range: 20Hz to 200Hz Determines the Lo Cut frequency.
31 Lo Damp (Colour)
Range: 0 to -18dB Attenuation of the frequencies below the selected frequency via the Lo Cut
parameter.
32 Lo Xover (Colour) Sets the Cross-over frequency between the Lo and LoMid Decay. 20 Hz - 500 Hz
33 Mid Xover (Colour) Sets the Cross-over frequency between the LoMid and HiMid Decay. 200 Hz - 2 kHz
34 Hi Xover (Colour) Sets the Cross-over frequency between the HiMid and Hi Decay. 500 Hz - 20 kHz
35 Hi Cut (Colour) Range: 20 to 20kHz. Attenuates the high-end frequencies.
36 Hi Soften (Colour)
Hi Soften is a special lter used to "soften" the high frequencies of Reverb diuse eld. This is not
a simple Hi Cut lter but a complex set of lters working together to remove the frequencies that
give a "brittle" or “harsh” sounding Reverb. Hi Soften is scaled/linked to the Hi Cut and Hi Decay
parameters.
37 Lo Decay (Colour)
Range: 0.01 to 2.5. Decay multiplier in relation to the Master Decay, for the frequencies below the
Lo Xover setting.
38 Lo Mid Decay (Colour)
Decay multiplier in relation to the Master Decay, for the frequencies above the Lo Xover and below
the Mid Xover settings.
39 Hi Mid Decay (Colour)
Decay multiplier in relation to the Master Decay, for the frequencies above the Mid Xover and below
the Hi Xover settings.
40 Hi Decay (Colour) Decay multiplier in relation to the Master Decay, for the frequencies above the Hi Xover setting.

Midas HD96-24-CC-TP Specifications

General

Brand	Midas
Model	HD96-24-CC-TP
Category	DJ Equipment
Language	English