299 HD96-24-CC-TP User Manual
How to prole a channel
When proling a channel, the signal is captured post preamp and is not aected by any channel processing performed on that channel. For the best results the input
level of the channel to be prole should be between -30 dB and 20 dB making sure to avoid clipping.
1. Press the prole button when audio is playing. Each time a channel is proled a new prole is created. Each prole and its associated presets are determined by
the audio playing at the moment when the channel is being proled. This means dierent presets can be created for the same channel by proling the channel
multiple times. When selecting a prole, details associated to the chosen prole are displayed in the respective elds.
2. Prole selection
You can create up to 4 proles for each channel by pressing the prole button.
Proles are numbered in chronological order from 1 (oldest) to 4 (latest).
Upon channel selection, the latest prole created is automatically selected.
By selecting a prole cell, it is possible to access all the settings related to it, i.e.:
1. Name of the detected instrument
2. Spill indicator
3. Condence indicator
4. Adaptive suggestions for the selected channel
To Next Page
Loading...
