Midas HD96-24-CC-TP - Assignables Types: Groups

201 HD96-24-CC-TP User Manual
Assignables Types: Groups.
Page 1 POP Groups.
• • All – Scrolls through all channels on the surface and GUI using all banks dened as Area A.
• • INs – Scrolls through all inputs on the surface and GUI using all banks dened as Area A.
• • OUTs - Scrolls through all outputs on the surface and GUI using all banks dened as Area A.
• • VCAs - Scrolls through all VCAs on the surface and GUI using all banks dened as Area A.
• • TAGS – Spills to the surface all tagged channels based on selection from the Tags & Pops widget via the Suggested tab in the Home workow.
• • System Tags – Shows the selected system tagged channels as selected from the Tags & Pops widget.
• • Favourite Tags – Shows selected Favourite Tagged channels on the surface.
• • FX – Shows send/return channels to FX and any channel with an FX inserted.
• • All Contribs – will show all contributions of a selected aux/bus
• • In Contribs – will show input contributions of a select aux/bus
• • Out Contribs – will show contributions of a select aux/bus
• • Clipped Channels – Brings all currently clipped channels to the surface.
• • POP 1-24 - The next 24 Assignables are for each POP group individually. They can be assigned to any area in the assignable shortcuts area.
Page 2 Mute Groups.
Mute groups 1 to 12 – Engage the selected mute group to turn o predened sets of channels.
Page 3 Talk Groups.
Talks to Outputs - When active the talk back bus is sent to all Outputs.
Talks to Inputs - When active the talk back bus is sent to all Inputs.
Talks to Auxes - When active the talk back bus is sent to all Auxes.
Talks to Matrices - When active the talk back bus is sent to all Matrices.
Talks to Group 1 to 12 - When active the talk group turn on the talk bus to predened sets of channels.
Page 4 Outputs
Aux Output (1-96) – A dedicated output selection shortcut for every aux in the system.
Matrix Output (1-24) – A dedicated output selection shortcut for every Matrix in the system.
Left, Right and Mono – A dedicated output selection shortcut for every Master bus in the system.
Assignables Types: Others.
Page 1 Presets
Previous Preset – Recalls the Previous Preset in the current preset list.
Next Preset - Recalls the Next preset in the current preset list.
Pro Series Mode – Puts the surface into Pro series mode – Bank 1&2 Area A. Bank 3 VCA or Outputs. Bank 4 Masters.
HD24 Mode – Puts the surface into Pro Series Mode – Bank 1,2 and 3 Area A. Bank 4 Masters.
Monitor Mode – Puts the surface into Monitor Mode – Bank 1&2 Area A. Bank 3 Outputs. Bank 4 Masters.
Theatre Mode – Puts the surface into Theatre Mode – Bank 1 Area A. Bank 2 VCAs. Bank 3 Outputs. Bank 4 Masters.
VCA Mix Mode – Puts the surface into VCA Mix Mode – Bank 1&2 Area A. Bank 3&4 VCAs.
Switch Preset –
Flip Mode – Activate ip mode for the currently selected channel.
Pin Layer – Locks the currently selected layer to the surface until the layer is unpinned.
Custom Desk Layouts - Puts the surface into a previously set up custom layout.
Page 2 Others
Tap Tempo – Tap tempo control.