36 HD96-24-CC-TP User Manual
Chapter 6. Navigation
An Introduction to navigation
The HD96-24 has full multi-touch screen control. This gives the user some of the feeling of working with analogue consoles, whilst at the same time, incorporating
modern ways of interacting with everyday products like Smartphones and Tablets. One of the advantages digital consoles have over analogue ones is that their
channel count is not limited by the control surface hardware. However, this means that only a certain number
of channels can be shown on the control surface at any one time, while the others are available at the touch of the screen (GUI) or assignable shortcuts area.
Pressing the SEL (select) button on any input or output will bring the chosen channel to the surface and GUI controls. Pressing SEL again on a stereo channel will switch
the view to the right side of the channel. From here, adjustments to many common parameters can be changed such as Gain, EQ, Dynamics or Pan position. This way of
working has a familiar feel that you will understand and be comfortable to use. Mute will stop audio passing and solo will send the audio of the selected path to either
the A or B solo bus depending on path settings.
To Next Page
Loading...
Need help?
General
