Midas HD96-24-CC-TP - Distortion;Exciter; Enlightenment Bass

181 HD96-24-CC-TP User Manual
Distortion/Exciter:
Enlightenment Bass
The Enlightenment Bass adds rich harmonic content based on the lowest fundamental in order to increase the perception of bass in the mix.
Adjust Intensity to around -6dB to start. A small amount of Intensity goes a very long way. Excessively high settings will increase the perceived bass level but may
result in bass distortion!
Item Control Function
1 Input Metering Metering shows input level.
2 Power On - Switch Bypass the eect.
3 Intensity - Control Controls the amount of harmonic content created.
4 Crossover Frequency - Display Shows the crossover frequency. 32 Hz to 245 Hz.
5 Crossover Frequency - Control Sets the frequency at which the eect starts to work (below the crossover point).
6 Sub Level - Control Adjusts the amount of sub bass in the signal path.
7 Output Gain - Control Adjust the overall level of the signal.
8 Solo - Button Solo the sub signal to ne tune the sound.
9 Output Metering Metering shows output level.