94 HD96-24-CC-TP User Manual
True Audition
In the top right of the EQ widget is the innovative EQ Audition button. In this mode the EQ display turns yellow and any changes to EQ will only be heard in the solo bus.
For example, this allows you to ne-tune the EQ without aecting the sound in an artist’s in-ear mix. Once you have made your changes either press the green APPLY
button to commit instantly or press the red x to cancel the audition EQ and return you to your live mix.
Warning: If you press the green commit button any changes will happen immediately and can aect everyone listening to that channel. Big EQ changes will be very
noticeable.
The FLATTEN EQ and EQ ON/OFF buttons can also be heard just in the solo bus when in preview mode. This allows you to hear the dierence the whole EQ is making on
a signal before committing to it.
Output processing
The outputs have a four-band parametric equaliser with shelving modes on bands 1, 2 and 4 and operate in a similar way to the input EQ. The options are:
Band 1 HP 6dB, HP12dB, Bell or Shelf lters.
Band 2 Bell or HP24dB (When HP24dB is in use Band 1 is disabled)
Band 3 Bell with Gain, Frequency and Width controls.
Band 4 LP 6dB, LP12dB, Bell or Shelf lters.
To Next Page
Loading...
Need help?
General
