Milestone ultraWAVE 3 - 21 CFR - PART 11 SOFTWARE; Software Compliance and User Management

Milestone Srl MA245-001 – ultraWAVE 3 – User Manual
110
Control settings
This settings can only be edited by Service
Cavity control system (CCS)
The settings of the cavity control system (CCS)
can only be edited by Service.
Service check
Counter of the number of runs to notify the user
of the service check
MW energy test
This window is for the microwave energy test.
Contact your service engineer for more details
about the test.
Other setup windows
The below parameters can be modified only by a Milestone service engineer.