EasyManua.ls Logo

Milestone ultraWAVE 3 - Description of the System; Unpacking;Check-List; Installation Site; Technical Specifications

Milestone ultraWAVE 3
157 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Milestone Srl MA245-003 ultraWAVE 3 User Manual
24
4 DESCRIPTION OF THE SYSTEM
Unpacking/Check-list
Check all system parts within 24 hours from receipt and inform your local Milestone representative
in case of any discrepancies.
Check carefully the unit in case of damages in transport. Damaged units may not be installed nor
operated. Damages must immediately be communicated in writing.
Store the box and packing material in a safe place. In case of return for repair after long use the unit
shall only be shipped back to the manufacturer in its original packing and secured with packing bands.
Improperly packed units can be severely damaged during transport.
Installation site
Please look at the pre-installation file for more details.
Before switching the unit on (when coming from a storage area), allow the instrument to reach
environment operating conditions (at least 30 minutes).
Technical Specifications
Unit
Power Supply
230 V (+15/20 %); 50 / 60 Hz
Safety devices
16 AT, 250V mains power supply
Magnetron Operating Voltage
4 kV
Power consumption at max. heating power
2500 VA
Maximum delivered power to pressure
vessel
1500 W
Microwaves in the microwave cavity
Frequency: 2,45 GHz
Wavelength: 12,25 cm

Table of Contents

Related product manuals