Milestone Srl MA245-001 – ultraWAVE 3 – User Manual
130
13 LIST OF QUERIES AND (ERROR)
MESSAGES
In this chapter, most queries and (error) messages and their meanings are listed. They are sorted by the
following keywords:
▪ Sensors, Settings and Twist
▪ Internal memory, disks and signature
The password you entered is incorrect.
Please repeat your entry or cancel the login.
The password you entered is invalid for the selected
user.
You have no permissions for this device.
Please contact your administrator.
The device has the login mode "with disk". The signature
of the disk is part of a user who has no access to this
device.
The registered name already exists. No name can be
used twice. Choose a different name.
The name of the user must be different.
Sensors, Settings and Twist
In your system are no sensor inputs
configured.
Please contact your local service partner.
There are no configured sensors. The configuration of the
sensors can be made only by the service (see Chapter
sensor data).
Your system contains a sensor for pressure
measurement.
Therefore the pressure curve was checked.
This curve is not sufficiently defined.
Do you really want to start the application ?
The curve of a sensor is not completely defined.
During the program the measuring of this parameter is
not verified. This can lead to uncontrolled power output
(see chapter description of the program parameters).
The control of the temperature sensors checked an error.
The value of T1 (T2) has changed in one second of 25.0
° C to 100.0 ° C and thus exceeded the limit of 50.0 ° C.
The sensor check has detected an error in the
temperature measurement (see chapter Sensor Check).
To Next Page
Loading...
