Milestone Srl MA245-003 – ultraWAVE 3 – User Manual
73
Apply protective grease to the metal cover and
over the green o-rings of the PTFE parts
Reassemble PTFE parts on metal parts, always
using the appropriate tools
Do not over-tighten PTFE screwed parts in order to avoid thread damage
Cleaning instructions in case of spilt acids
In case of acid leakage from the reactor, immediately dry with absorbent paper and clean
the part with paper moistened with water.
If acid has entered the external slot outside the reactor, please contact a service
technician for a check.
To Next Page
Loading...
