Milestone Srl MA245-003 – ultraWAVE 3 – User Manual
64
Continue to follow the instructions on the display
terminal to properly open the reactor cover.
When the cover is completely lifted, put the Sample
try as protection for acid drops to the steel vessel.
All cover, metal, and sample vessel parts must be carefully cleaned and dried after opening. See also
chapter
Service and Maintenance
.
All samples can now be directly transferred in vials or measuring beakers for the final dilution and
analysis.
After the unit cleaning, the fun should be switched off, if it is not necessary.
System status indicator
The frontal light change color giving information about the status of the system.
Here below a list of colour codes:
White: The device is ready to start
To Next Page
Loading...
