Milestone Srl MA245-003 – ultraWAVE 3 – User Manual
12
The system will automatically start the gas loading into the reactor to reach the initial set pressure
(usually 40 bar).
Open the system
After the run, the system automatically cool down the solutions, releases the pressure from the reactor
and run the flushing of the pressure line.
A message on the terminal and the green light indicate that the unit can be opened.
Follow the instructions on the terminal to complete the opening of the reactor.
Remove the rack and place it on the rack-holder to recognize positions and easily remove the vials.
Transfer the solutions to volumetric flask for final dilution.
To Next Page
Loading...
