EasyManua.ls Logo

Milestone ultraWAVE 3 - Condensate Draining

Milestone ultraWAVE 3
157 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Milestone Srl MA245-001 ultraWAVE 3 User Manual
77
Oil level should be between the marks.
It should not be over or under.
Should the oil level be under the mark, oil must be
re-filled (dose it carefully adding only small quantities
at a time).
Pull out the stick and use a small funnel to refill.
Proceed slowly. Check the oil level under constant
measuring conditions.
Condensate draining
Condensate generated during operation is
gathered in the intermediate separator and
filtering system. Condensate is discharged
both over the oil separator and the
condensate drain.
Condensate should be
discharged at least once daily.
(Open both caps).
Open the caps to discharge and let the condensate run off. Condensate is collected in a suitable tank and
disposed of at a later stage.

Table of Contents

Related product manuals