Milestone ultraWAVE 3 - 14 Ultrawave 3 Cleaning Procedure

Milestone Srl MA245-001 – ultraWAVE 3 – User Manual
134
14 ULTRAWAVE 3 CLEANING PROCEDURE
This is the cleaning guideline; more information can be found in the UltraWAVE 3 user manual
(Service and maintenance chapter).
Frequency
Part/
Component
Action
Picture
Every run
PTFE Cover
Dry the PTFE cover
Every run
Metal clamps
and pressure
vessel
Clean and dry the
metal clamps
Every run
O-ring on the
TFM vessel
Check the
conditions of the
o-ring. In case
some deformation
of O-ring,
immediately
change it.
Every day
All metal parts
(cover, clamps
and reactor).
Dry and clean with
Ethanol all metal
parts. Clean the
bottom of the Metal
reactor with a
cotton buds