Milestone Srl MA245-001 – ultraWAVE 3 – User Manual
133
You have your drain signed, without saving it.
Do you want to leave this page?
The signature is maintained until after the storage.
The disk already has a signature. The signature of the
disk will be overwritten.
Security check before writing a signature on a disk that
already has a signature. The existing signature is
overwritten.
Error when writing the signature.
When writing the signature to the disk an error has
occurred. Cause might be a defective or full disk.
Your disk has no signature.
Please contact your administrator.
The device has the login mode "with disk". However, the
inserted disk has no signature.
You can only activate this mode if you have a flash card
with a signature for service or administrator.
The login mode can be selected only with a data carrier
with service or administrator signature.
The image could not be saved. Verify that a disk is
inserted and whether this has enough space for the
image.
When you save the current program to disk an error has
occurred. The disk is not connected, faulty or full.
To Next Page
Loading...
