Milestone ultraWAVE 3 - Cleaning of Reactor and Cover with Protective Oil and Grease

Milestone Srl MA245-003 – ultraWAVE 3 – User Manual
69
Wipe the PTFE cover, the steel cover laterally to
remove the condensate.
Check that there are no acid residues.
Wipe and dry also any acids left on the drip protection
or the steel reactor.
Remove the base load
Your ultraWAVE 3 system is now ready to perform a new digestion run
Cleaning of reactor and cover with protective oil and grease
Frequency:
Every day
Before switching off the unit, clean the stainless-steel vessel, cover and clamps with ethanol first and then
with the protective grease.