Milestone ultraWAVE 3 - File and Data

Milestone Srl MA245-001 – ultraWAVE 3 – User Manual
131
This message depending on the actual and nominal
values and can vary according to the appearance.
Check the temperature sensor and the placement of the
sample (infrared sensor).
Your have not entered a value for the element
"Control for".
Please select one of the available sensor inputs.
You do not have defined the parameter according to
which the power has to be controlled.
In the register Method \ Parameters you must specify
which parameters you want to control (see Section
parameters).
Twist function will be disabled.
Temperature and pressure sensors can be damaged.
Are you shure to deactivate the twist function ?
Security check when disabling the twist function (see also
Chapter Twist)
Twist error
A twist error occurred. Check the twist mode of your
system.
No change of direction of rotation is detected by the
system.
Check the twist function or contact service.
File and Data
Text
Meaning / Comment
You have modified the current data collection.
Do you really want to ignore these modifications
and load the new data collection ?
You have not saved the current method.
When you load a method, the current methods settings
are overwritten, including the microwave program.
You have modified the current data collection.
If you leave this page all data will be lost.
Do you really want to ignore these modifications
and leave this pages ?
You have not saved the current method.
When you exit the application pages an unsaved method
is lost.
The method can be stored in the register method.
File open error.
When opening a file an error has occurred.
File read error.
When opening a file from disk an error has occurred.
Old file formats are basically always readable.
Please enter a valid file name.
When you open or save a file, a file name must be
specified (either by typing in the appropriate box or by
selecting an existing file).
The file already exists.
Do you want to overwrite the existing file ?
If a file is saved under the same name as an existing file,
the existing file is overwritten.
File write error.
When writing a file on the disk, an error has occurred.
Cause may be a full, missing or "destroyed" disk.
Do you really want to delete this file ?
Confirmation request before deleting a file. A deleted file
is permanently lost.