Minebea CSD-709 User Manual

D Detection Operation and Section
147
D.1.2 Bottom hold
In bottom hold mode, the load measured immediately before is compared to the current load and,
when [load measured immediately before ≥ current load] is established, the current load is held as a
bottom.
In actual measurements, the bottom shown below is held. When the RESET input is generated
during the detection process, the displayed load will be [0].
A (held as bottom)

Minebea CSD-709 Specifications

General

Brand	Minebea
Model	CSD-709
Category	Measuring Instruments
Language	English