Minebea CSD-709 User Manual

1 Overview
15
1.6 Basic key operation
To toggle between Measurement mode and any other mode, use the key. To move to any of
COMP setting modes from the Function mode, press the or key to change the display,
then press the key. To return to Measurement mode from any other mode, press the key
several times.
In Function, C function, and P function modes, respectively, the following numerical values prefixed
with the codes shown below are displayed.
Mode Prefix Representation in this manual
Function mode F-xx [F-xx]
C function mode CF-xx [CF-xx]
P function mode PF-xx [PF-xx]
Function mode
CAL selection mode
Check mode
COMP setting mode
C function mode
P function mode
Measurement mode

Minebea CSD-709 Specifications

General

Brand	Minebea
Model	CSD-709
Category	Measuring Instruments
Language	English