Revision History
4
Revision History
Date Manual No. Revision reason (details)
2017/03 DRW. No. EN294-1742 ROM Ver.1.000
2017/04 DRW. No. EN294-1742A
Due to ECN No.FN17-02059
A.11.3 BCD output (Sync type), A.11.4 BCD outpu
(source type)
Change from [~1 000, or 4 000 times/s] [~ 1 000, 2 000,
or 4 000 times/s].
G3. Setting, Function Setting Table
F-33
Change from [~, 2 (5 ms)] to [~, 2 (10 ms), 3 (5 ms), 4
(1.25 ms), 5 (0.5 ms), 6 (0.25 ms), 7 (0.125 ms)].
F-34
Change from [~, 5 (1 000 times/s), 6 (4 000 times/s)] to [~,
5 (1 000 times/s), 6 (2 000 times/s) ,7 (4 000 times/s)]
2017/06 DRW. No. EN294-1742B
Due to ECN No.FN17-02111
7.5. Change [Confirmation with Check mode] to
[Confirmation with Check mode (EzCTS, Version,
Options, Excitation voltage, External control input/output,
Analog output, BCD output, Monitor mode)]
7.5.1. Changing the settings in EzCTS mode
Add [EzCTS is a personal computer application (option).
The function data of CSD-709 can be easily read-out and
written with EzCTS. This software is useful for
maintenance and backup of data.]
A.10. Accessories
Change [CD-ROM(application)] to CD-ROM *
(CSD-709D-01, EzCTS)
Add [* The CD-ROM attached when the optional
additional memory is mounted in the CSD-709 includes
both of the dedicated application CSD-709D-01 and the
EzCTS.]
2018/06 DRW. No. EN294-1742C
Due to ECN No.FN18-02034A
G1
Wiring
･Add the note.
Only BCD-ENABLE (pin number B15) of the source
type becomes effective at the [OPEN].
Use this function after short-circuiting B15 and A1 or B1
when you do not use it.
G4.
Timing chart
･Raplace the drawing.
･Correct mis-writing
To Next Page
Loading...
Need help?
General
