Minebea CSD-709 - Page 4

Introduction
2
In this manual, the headings of sections and paragraphs indicate the accompanying functions used
to set various features of the CSD-709. For example, the heading shown below accompanies
function [CF-07] in order to set an appropriate value for C function CF-07 when it is necessary to set
the excitation voltage.
*****************************************************************************************************************
2.3 Setting the excitation voltage [CF-07]
*****************************************************************************************************************
Furthermore, the default of each function is described on an as-needed basis in this manual. For
example, the default for C function CF-07 used to set the excitation voltage is described as shown
below.
*****************************************************************************************************************
10 VDC
*****************************************************************************************************************
Default