Appendix B Communications Setup
156 Lynx II DSA User's Manual - 7096089
Ping statistics for 10.0.0.3:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\>
Access the Lynx II
To access the Lynx II Menu:
1. Open your Internet browser on your PC.
2. In the URL line, enter 10.0.0.3 and press Enter.
3. From the Navigation view, select Maintenance and then Network to access the
network settings. Click on the Save button for the changes to take effect.
4. When communication between the PC and Lynx II has been properly established,
the Web Client application will download into the browser and begin executing; a
‘connection’ message similar to that below should appear as the application
negotiates the protocol details with Lynx II.
5. By default, you should not see the 'Login' page requesting the User Name and
Password because the Lynx II is shipped from the factory with its “Login required”
feature disabled. If needed, defaults are administrator for the User, and password
for the Password.
6. When finished with the setups, simply close your Internet browser.
To Next Page
Loading...
Need help?
General
