Mita PointSource Ai 5555 - Page 166

2 - T - 3
OTHER KINDS OF CONTROL
(2) FM16 LD (FM16 → CB)
This signal becomes [L] when FM16 reaches the set
speed.
(3) FM22 LD (FM22 → CB)
This signal becomes [L] when FM22 reaches the set
speed.
(4) FM2 LD (FM2 → CB)
This signal becomes [L] when FM2 reaches the set
speed.
b. Output signal
(1) FM11 H/L (CB → FM11)
Rotational speed control signal for FM11
[L]: Low speed rotation
[H]: High speed rotation
(2) FM16 H/L (CB → FM16)
Rotational speed control signal for FM16
[L]: Low speed rotation
[H]: High speed rotation
(3) FM22 H/L (CB → FM22)
Rotational speed control signal for FM22
[L]: Low speed rotation
[H]: High speed rotation
(4) FM2 DRIVE (CB → FM2)
ON/OFF drive signal
[L]: FM2 ON
[H]: FM2 OFF