2 - A - 2
MAIN BODY
PRODUCT SPECIFICATIONS
(By-pass feed
only)
1. Type
Type: Console type
(floor-mounted type)
Copying method: Indirect electrostatic method
Original table method: Fixed
Photosensitive
material: OPC
Sensitizing method: Laser writing method
Resolution: Copier 400 DPI
Printer 600 DPI
Paper feed method: Two stacked trays (500 sheets x
2, 80 g/m
2
) (21lb)
Multi by-pass tray (100 sheets,
80 g/m
2
) (21lb)
LCT (1000 sheets/1500 sheets,
80 g/m
2
) (21lb)
2. Functions
Originals: Sheets, books, solid objects
Original size: Max A3/11" × 17"
Copy size: A3 to A5/11" × 17" to 5
1
/
2
" × 8
1
/
2
"
Magnification
Fixed magnifications: 100%, 200%, 155%, 129%, 77%,
65%, 50%
Special ratio
magnifications: 3 modes
Zoom magnification: 33% to 400% (1% steps)
Vertical magnification: 33% to 400% (1% steps)
Horizontal
magnification: 33% to 400% (1% steps)
(In the
very high
mode, how-
ever, the magnification range is
65% to 400%)
Warm-up time: Approx. 7 minutes
(20°C/68°F, rated voltage)
First copy time (seconds)
Size
Manual
AE
APS
A4/8
1
/
2
" × 11"
3.9
4.4
3.9
Size
A4/8
1
/
2
" x 11"
A4/8
1
/
2
" × 11"
55
Number of
continuous copies: 1 to 999
Copy density selection:
AES, manual
Arbitrarily set density (2 modes)
Continuous copy speed (life size, copies/minute)
Special functions: Sheet/Cover Interleave, Chapter,
Combination (2-in-1, 4-in-1, 8-in-
1, overlay), Booklet, Transpar-
ency Interleave, Image Insert,
Book Copy, Mixed Original, Text
Photo Enhance (text/photo/pen-
cil), Reverse Image, Repeat,
Frame/Fold Erasure, AUTO Lay-
out, Thin/Thick Paper, Image
Shift, Non-image Area Erase,
memory function, density moni-
tor, single step, density shift, print-
ing function, copy reservation,
original rotation, weekly timer, job
memory
3. Copy Paper
Plain paper
High quality paper (60 g/m
2
to 90 g/m
2
)
(16lb to 24lb)
Special paper * Label paper
(By-pass feed * OHP film
only) * Recycled paper
*
High quality paper (50 g/m
2
to 59 g/m
2
,
13lb to 16lb) (91 g/m
2
to 130 g/m
2
, 24lb
to 34lb)
4. Options
Finisher (F-8220)
Large capacity tray (ST-3500)
Key counter
Printer controller
Network card
Video interface kit
Tandem kit
5. Particulars of Machine
Power source: 120 V AC ±10%, 60 Hz , 20A
Power consumption: Max 2100 W (230 V)/1800 W
(120 V) (when all options are
connected)
Weight: Approx. 208 kg/457.6 lbs (main
body 194 kg/426.8 lbs, RADF
14 kg/30.8 lbs)
MAIN BODY-1
To Next Page
Loading...