90
C
ONFIGURING SOFTKEYS SPEED DIAL KEY
Creating a Speed Dial Key Using the Speed Dial Edit Option (applicable to
softkeys, dialpad keys, expansion module keys
1. Press on the phone to enter the Options List.
2. Navigate to the Dialing> Speed Dial Editoption and press the select button or Select softkey.
NOTE: You can press the Cancelsoftkey at anytime during the speed dial programming to cancel and not
save the speed dial information.
3. Navigate to the desired type of keys you want to edit (e.g. Top Softkeys) and press the select button
or Select softkey.
4. Navigate to the desired key (by pressing the up and down navigation key) and in the Labelfield (if
applicable), enter a label to apply to the key.
NOTE: If necessary, use the ABCsoftkey to specify uppercase letters or lowercase letters when entering
the label.
5. Press the down navigation key to move to the Numberfield (if applicable) and enter a number for the
key using the dialpad keys.
6. Press the down navigation key to move to the Linefield and select a line to apply to the key. This is
the line that the phone opens to dial the number after you press the respective Speed Dialkey. By
default, the phone uses Line 1 for the Speed Dialkey. If you want to use a different line, press the left
or right keys to select another line.
7. Press the Save softkey to save the speed dial information to the key you selected.
To Next Page
Loading...
