Mitel 6930 - Using Handsfree Speakerphone; Using a Headset

116
C
ONFIGURING SOFTKEYS CONFERENCE KEY
Configuring a Outgoing Redial Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.orClick on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1through Key 44 on the Top keys.orSelect from Key 1through Key 24 on the Bottom
keys.
3. In the Type field, select Redial.
4. In the Label field, enter a label to apply to this key.
5. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
6. Select from Key 1through Key 84(M695).
7. In the Type field, select Redial.
8. Click Save Settings.
Conference Key
Using the Mitel Web UI, you can assign a Conferencekey to any key on the top or bottom keys on the
phone.
NOTE: For more information about conferencing, see “Conferencing Calls” on page 133 .