Mitel 6930 - Intercom Functionality; Outgoing Redial List

118
C
ONFIGURING SOFTKEYS INTERCOM KEY
Configuring a Transfer Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.orClick on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1through Key 44 on the Top keys.orSelect from Key 1through Key 24 on the Bottom
keys.
3. In the Type field, select Transfer.
4. In the Label field, enter a label to apply to this key.
5. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
6. Select from Key 1through Key 84(M695).
7. In the Type field, select Transfer.
8. Click Save Settings.
Intercom Key
You can use the Intercomkey to automatically connect with a remote extension for outgoing calls, and to
answer an incoming intercom call.
NOTE: For more information about the Intercom feature, see “Using Intercom Functionality” on page 119.