Mitel 6930 - Mute Functionality

124
C
ONFIGURING SOFTKEYS EMPTY KEY
7. In the Typefield, select Call History.
8. In the Label field, enter a label to display on the phone for the key (default is "Call History").
9. Click Save Settings.
Empty Key
You can set a softkey to force a blank entry on the IP phone display for a specific key. You do this by
setting the softkey to Empty. The keys are added in order (from key 1 to Key 24 [bottom] or Key 44 [top])
after any hard-coded keys have been added. If a particular key is not defined, it is ignored.
Configuring an Empty Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.orClick on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1through Key 44 on the Top keys.orSelect from Key 1through Key 24 on the Bottom
keys.
3. In the Type field, selectEmpty.
4. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
5. Select from Key 1through Key 84(M695).
6. In the Type field, selectEmpty.
7. Click Save Settings.
None Key
Use the following procedure to delete a key’s functionality on the 6930 IP phone.