82
C
ONFIGURING SOFTKEYS
Configuring Softkeys
Your 6930 has 12 multi-functional top softkeys and 5 multi-functional bottom softkeys:
• 12 top softkeys: programmable non-state-based softkeys (up to 44 programmable functions)
• 5 bottom softkeys: programmable state-based softkeys (up to 24 programmable functions
NOTE:
a. If M695 Expansion Modules are attached to the phone, you can configure up to an additional 84
softkeys on each M695 Expansion Module.
b. The 6930 IP phone allows up to 3 expansion modules on each phone. For more information
about expansion modules, see “Model M695 Expansion Module”
You can use the Mitel Web UI to configure key functions.
The following table lists the functions you can set on the softkeys and provides a description for each func-
tion.
Key Function Description
Key Function Description
None Indicates the key has no function assigned.
Line Indicates the key is configured for line use
(programmable on the top softkeys only).
Speed Dial Indicates the key is configured for speed dial use.
Do Not Disturb Indicates the key is configured for Do Not Disturb
(DND) functionality.
BLF Indicates the key is configured for Busy Lamp Field
(BLF) functionality (programmable on the top
softkeys only).
BLF/List Indicates the key is configured for BLF/List
functionality (programmable on the top softkeys
only).
Auto Call Distribution (ACD) (For Sylantro Call Managers)
Indicates the key is configured to allow the Sylantro
call managers to distribute calls from a queue to
registered IP phone users (agents) (programmable
on the top softkeys only).
XML Indicates the key is configured to accept an XML
application for accessing customized XML services.
To Next Page
Loading...
