189
M
ANAGING CALLS MOBILELINK
Answering an incoming mobile call using your Mitel 6930 SIP phone
When your mobile phone is paired and connected to your Mitel 6930 IP phone, incoming calls on your
mobile phone will be indicated on your Mitel 6930 IP phone as well.
To answer the incoming mobile call using your Mitel 6930 SIP IP phone, lift the handset for handset oper-
ation or press the (Speaker/Headset) key, blinking Mobile softkey, or Answer softkey for
handsfree operation
NOTE:
1. Press the Decline key to reject the incoming mobile phone call.
2. When there is an incoming call on both SIP line and the mobile line and you lift the SIP terminal
handset, the IP call takes priority over the mobile call.
3. During an active Bluetooth mobile call, the call hold reminder tone will not be heard even if the Call
Hold Reminder option is enabled on the phone.
Moving audio from an active mobile call between your mobile phone and
Mitel 6930 SIP IP phone
Switching mobile phone audio from your Mitel 6930 IP phone to your mobile phone and back again is
performed by a one-key-press method.
Press the Push call softkey to push the mobile call audio from your Mitel 6930 IP Phone to your mobile
phone.
To Next Page
Loading...
