79
C
USTOMIZING YOUR PHONE RESTART
key or softkey is pressed. With live dialpad disabled, if you dial a number while the phone is on-hook, lifting
the receiver or pressing the initiates a call to that number.
NOTE: Availability of this feature is dependent on your phone system or service provider.
You can enable/disable the live dialpad using the IP phone UI only.
Enabling/Disabling Live Dialpad Using the IP Phone UI
1. Press on the phone to enter the Options List.
2. Navigate to the Dialing > Live Dialpadoption and press the select button or Select softkey.
3. Use the up and down navigation keys to scroll through and enable ( On ) or disable ( Off ) the live
dialpad feature.
4. Press the Savesoftkey to save your changes.
Speed Dial Edit
NOTE: For details on speed dial configuration, see “Speed Dial Key”on page 78 .
Restart
You may want to restart your phone to check for updates on the server or you may occasionally need to
restart your phone for configuration changes to your phone or network settings to take effect. You may
also need to restart your phone if you have been asked to do so by your System Administrator or should
you experience any unexpected behavior.
To Next Page
Loading...
