149
M
ANAGING CALLS DIRECTORY
General Directory Functions
Accessing and Navigating the Directory (No External Directory Sources Configured/Enabled)
1. Press the (Directory) key or softkey configured with Directory functionality. If no external
Directory sources are configured or enabled, the local Directory is displayed as per the following
image.
NOTE: If the Directory is empty, a Directory empty message displays.
2. You can view entry details by pressing the up and down navigation keys to scroll through the list.
3. From the number selection column, press the right navigation key or the Details softkey to display the
contact’s details screen.
You can use the up and down navigation keys to scroll through the list of numbers or press the 4nav-
igation key to move to the address column and scroll through the contact’s addresses using the up
and down navigation keys.
4. Press the softkey configured with Directory functionality, key, or Quit softkey to exit.
To Next Page
Loading...
