88
C
ONFIGURING SOFTKEYS SPEED DIAL KEY
Configuring a Line Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.orClick on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1through Key 44 on the top keys.
3. In the Typefield, select Line to apply to the key.
4. In the Label field, enter a label to apply to this key.
5. In the Linefield, select a line to apply to this key. Valid values are 1through 24.
Expansion Module Keys
6. Select from Key 1through Key 84(M695).
7. In the Linefield, select a line to apply to this key. Valid values are 1through 24.
8. Click Save Settings.
Speed Dial Key
The normal function of the speed dial option allows you to dial a number quickly by pressing a key config-
ured for speed dialing. You can program the keys on the 6930 to speed dial outside numbers, dial directly
to another person’s line or extension, or quickly access features such as Caller ID (*69) and voicemail.
NOTE: You can use a Speed Dialkey while on an active call by placing the active call on hold first, and
then pressing the speed dial key.
You can create Speed Dial keys using any of the following methods:
• Using the Mitel Web UI at the paths:
• Operation > Softkeys and XML
• Operation > Expansion Module Keys
• Using the IP phone UI at the path Options >Dialing > Speed Dial Edit
• By pressing and holding a softkey, dialpad key, or expansion module key.
Speed Dial Prefix
The speed dial feature also allows you to specify a preset string of numbers followed by a + that the phone
dials automatically after pressing the speed dial key. You can use this feature for numbers that contain
long prefixes.
For example, if you had the following speed dial configuration in the Mitel Web UI:
To Next Page
Loading...
