Mitel 6930 - Configuring Goodbye Key to Cancel Incoming Calls; Message Waiting Indicator

211
A
DDITIONAL FEATURES MESSAGE WAITING INDICATOR
If you enable this parameter, which is the default, pressing the key rejects calls coming into the
phone while you are on an active call. When you disable this parameter, pressing the key hangs
up the active call.
Configuring Goodbye Key to Cancel Incoming Calls
1. Click on Basic Settings > Preferences >
General.
2. The Goodbye Key Cancels Incoming Call field is enabled by default. To disable this field, uncheck
the box.
3. Click Save Settings to save your settings.
Message Waiting Indicator
You can configure the Message Waiting Indicator (MWI) to illuminate for a specific line or for all lines. For
example, if you configure the MWI LED on Line 2 only, the LED illuminates if a voicemail is pending on
Line 2. If you configure the MWI LED for all lines, the LED illuminates if a voicemail is pending on any line
on the phone (lines 1 through 24).
You configure the MWI using the Mitel Web UI.