Mitel 6930 - Headset Volume and Call Handling

117
C
ONFIGURING SOFTKEYS TRANSFER KEY
Configuring a Conference Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.orClick on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1through Key 44 on the Top keys.orSelect from Key 1through Key 24 on the Bottom
keys.
3. In the Type field, select Conference.
4. In the Label field, enter a label to apply to this key.
5. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
6. Select from Key 1through Key 84(M695).
7. In the Type field, select Conference.
8. Click Save Settings.
Transfer Key
Using the Mitel Web UI, you can assign the Transferkey to any key on the top or bottom keys on the
phone.
NOTE: For more information about transferring calls, see “Transferring Calls” on page 129.