Mitel 6930 - Received Callers List Key

103
C
ONFIGURING SOFTKEYS PARK/PICKUP KEYS
services provided by the server. Contact your System Administrator for information about available
services.
Configuring a Sprecode Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.orClick on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1through Key 44 on the Top keys.orSelect from Key 1through Key 24 on the Bottom
keys.
3. In the Typefield, select Sprecode.
4. In the Label field, enter a label to display on the IP phone for this key.
5. In the Value field, enter the appropriate value for accessing specific services from the server.
NOTE: For values to enter in this field, contact your System Administrator.
6. In the state fields, check (enable) or uncheck (disable) the Connected state for this softkey.
Expansion Module Keys
7. Select from Key 1through Key 84(M695).
8. In the Typefield, select Sprecode.
9. In the Value field, enter the appropriate value for accessing specific services from the server.
NOTE: For values to enter in this field, contact your System Administrator.
10. Click Save Settings.
Park/Pickup Keys
The 6930 phone has a park and pickup call feature that allows you to park a call and pickup a call when
required. The park/pickup feature performs as follows:
• When a call comes in and you pickup the handset, you can press the applicable Parkkey to park the
call
• After the call is parked, you can press the Pickupkey, followed by the applicable value to pickup the
call