108
C
ONFIGURING SOFTKEYS SPEED DIAL/XFER
– 1through24
10. Click Save Settings.
Speed Dial/Xfer
TheSpeed Dialkey allows a number to be dialed quickly by pressing one key configured for speed dialing.
TheTransferkey allows a call to be transferred to other recipients blindly or consultatively. The Speed
Dial/Xferkey combines the Speed Dialand Transferkeys’ functionality together allowing the user to
transfer calls or speed dial with one key.
NOTE: It is recommended that you enable the Switch UI Focus to Ringing Lineparameter when using
the Speed Dial/Xfer feature. For more information about this parameter, see “Switch UI Focus to Ringing
Line” on page 178.
Speed Dial/Xfer Key Requirements and Functionality
The Speed Dial/Xfer key has the following capabilities:
• Speed Dial/Xfer and Speed Dial: When the phone is in the idle state, pressing the Speed Dial/Xfer key
causes the phone to go offhook and dial the predefined extension.
• Speed Dial/Xfer and Blind Transfer: When the phone is connected to a call, pressing the Speed
Dial/Xfer key blind transfers the call to the predefined target.
If transferring a call fails, a message Transfer Faileddisplays, and you can reconnect the call (get the call
back) by pressing the line key again.
• Speed Dial/Xfer and Call Forward: When the phone is in the ringing state, pressing the Speed
Dial/Xfer key forwards the call to the predefined extension.
Configuring a Speed Dial/Xfer Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.orClick on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1through Key 44 on the Top keys.orSelect from Key 1through Key 24 on the Bottom
keys.
To Next Page
Loading...
