77
C
USTOMIZING YOUR PHONE DISPLAY
Configuring the Home Screen Mode and Screen Saver Timer
1. Press on the phone to enter the Options List.
2. Navigate to the Display option and press the select button or Select softkey.
3. Use the left and right navigation buttons tochange the desired home screen mode.
4. Press the down navigation key to highlight Screen Saver Timer.
5. Enter a value, in seconds, using the dialpad keys. You can set the timer from 1 (disabled) to 14400
seconds. Default is 1800 (30 minutes).
6. Press the Save softkey to save your changes.
Brightness Settings
The Brightness Level option on the IP phone allows you to set the amount of light that illuminates the
LCD display. Use this option to set the preference of brightness level.
The Brightness Timer option allows you to set the amount of time you want the LCD display to stay illu-
minated before turning the backlight off during a period of inactivity. For example, if you set the brightness
timer to 60, when the phone reaches 60 seconds of inactivity, the LCD backlight goes off.
NOTE: The Backlight timer/mode can be configured using the configuration files and the IP Phone User
Interface (UI).
To Next Page
Loading...
