Motion Control Engineering 2000 User Manual

Index-3
Default TC-MPI Parameters 5-72
Default XPort screen 5-99
DEIS, Front Door Enable Inspection Stop Switch Output 5-42
DEISR, Rear Door Enable Inspection Stop Switch Output
5-42
DETS 6-44
Device Data screen 5-99
DHEND, Door hold end flag 5-10
DHEND, Door Hold End Output 5-42
DHENDR, Door hold end rear flag 5-10
DHLD, Door Hold Input 5-31
DHLD, Door hold input flag 5-10
DHLDI, Normal door hold input flag 5-10
DHLDR, Rear Door Hold Input 5-31
DHO, Door hold open flag 5-10
DHO, Door Hold Output 5-42
DHOF/R 5-41
DHOF/R, Door Hold Output Front/Rear option 5-41
DHOR, Door hold open flag (rear) 5-10
Diagnostic Mode ??–5-13
DIN, Door open inactive flag 5-10
DIR. PREFERENCE UNTIL DLK option 5-23
DISABLE DPM ON FIRE PH.2? option 5-21
DISABLE LOCAL HALL CALLS? option 5-19
DISABLE TOP FLRS ON PITFLD option 5-53
DISB, Distress Buzzer output 5-42
DISL, Distress Light output 5-42
DISLX, Auxiliary Distress Light output 5-42
dispatching features
dispatch load 5-63
heavy load (hall call bypass) 5-63
light load (anti-nuisance) 5-63
overloaded 5-63
DISPATCHING OPERATION option
Selective Collective 5-17
Single Automatic Push button 5-17
Single Button Collective 5-17
DL INPUT FAILURE message 6-9
DLAB 6-41, 6-42
DLABR 6-42
DLAT 6-42
DLI, Dispatch Load Input 5-31
DLI, Dispatch Load Input flag 5-10
DLK, Door lock input flag 5-10
DLKS, Door lock store bit flag 5-10
DLMS 6-42
DLOB, Door Left Open Bell Output 5-42
DLR INPUT FAILURE message 6-9
DLS, Door Lock Sensor Input 5-31
DLSR, Door Lock Sensor Rear input 5-31
DLW, Dispatch load weighing function flag 5-10
DMD, Demand down flag 5-10
DMU, Demand up flag 5-10
DNDO, Down direction output flag 5-10
DNENDR, Rear Door Hold End Output 5-42
DNI, Down Input (Attendant Service) 5-31
DNO, Down output (Attendant Service) 5-42
DNS, Down direction sense input flag 5-10
DNS, Down Sense output 5-42
DO1, DO2, DO4, DO8, DO16, D032
Binary coded P.I. outputs for digital P.I. devices 5-42
DOB 6-41, 6-44
DOB, Door open button input flag 5-10
DOBR, Door open button input (rear) flag 5-10
DOC, Door open command flag 5-10
DOCR, Door open command (rear) flag 5-10
DOF 6-41, 6-44
DOF, Door open function output flag 5-10
DOFR, Door open function output (rear) flag 5-10
DOFRX, Rear Door Open Function Auxiliary Output 5-41
DOFX, Door Open Function Auxiliary Output 5-41
DOI, Door open intent flag 5-10
DOIR, Door open intent flag (rear) 5-10
DOL 6-41, 6-44
DOL INPUT FAILURE message 6-10
DOL, Door Open Limit input 5-31
DOL, Door open limit input flag 5-11
DOLM, Door open limit memory flag 5-11
DOLMR, Door open limit memory (rear) flag 5-11
DOLR INPUT FAILURE message 6-10
DOLR, Door open limit (rear) flag 5-11
DOLR, Door Open Limit Rear input 5-32
DOOR BUZZER TIMER 5-27
Door Close Protection message 6-10
Door Close Protection Timer Elapsed message 6-10
DOOR HOLD INPUT TIMER 5-27
Door Hold Output 5-41
Door lock bypass 6-40
DOOR OPEN PROTECTION TIMER 5-27
Door Operation Menu options ??–5-26
DOOR POSITION MONITOR option 5-55
Door Position Monitor switch 3-20
DOOR TYPE IS? HORIZONTAL / VERTICAL option 5-25
Door Zone Sensor Failure - OFF Position message 6-10
Door Zone Verification 3-21
DOORENAB, Door Enable Output 5-42
DOORS TO LATCH DCF? option 5-26
DOORS TO LATCH DOF? option 5-25
DOORS TO OPEN IF NO DEMAND option 5-25
DOORS TO OPEN IF PARKED option 5-24
DOORS TO OPEN ON ALT FIRE option 5-24
DOORS TO OPEN ON MAIN FIRE option 5-24
DOUBLE STRIKE ON DOWN (Gongs) option 5-28
DOWN NORMAL LIMIT OPEN message 6-10
DOWN TERMINAL LIMIT FAILURE message 6-11
DPD, Down previous direction flag 5-11
DPM 6-41, 6-44
DPM REDUNDANCY FAULT message 6-11
DPM, Front Door Position Monitoring input 5-32
DPMR REDUNDANCY FAULT message 6-11
DPMR, Rear Door Position Monitoring input 5-32
DPR, Door protection timer flag 5-11
drawing numbers, description of 2-5
DRD (UP TO SPEED) FAILED TO ACTIVATE message 6-11
DRD INPUT FAILURE message 6-11
DSD, Down slow down input flag 5-11
DSH, Door shortening flag 5-11
DSH, Door Time Shortening Output (intermediate) 5-42
DSHT, Door shortening flag 5-11
DSHT, Door Time Shortening Front Output (final) 5-42

Motion Control Engineering 2000 Specifications

General

Brand	Motion Control Engineering
Model	2000
Category	Controller
Language	English