B
SimulCrypt • SimulCrypt Configuration
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
190
573408-001-a
Item Definition/Range
CP Extension
Specifies the maximum interval to wait for a failing ECMG before
changing the scrambling key.
Range: 0 – 1000
Note: 0 means an infinite extension upon ECMG failure.
First ECM-EMM PID
Defines the preferred range to be used for PID allocation when PID
remapping is disabled.
Range: 2 – 7590
Number of ECM-EMM PIDs
Defines the preferred range to be used for PID allocation when PID
remapping is disabled.
Range: 600 – 8189
Default Encryption Mode
Defines whether routed services must be encrypted (when received)
before encryption is scheduled by EIS.
Range: Clear or Encrypt
ECM ID Shift
This parameter is used to guarantee that ECM stream identifiers from
active and redundant devices do not coincide, so that the ECMG does
not reject ECM streams indicating that the ecm_id is already in use. If
the ECMG does not care about the value of ecm_id in different ECM
streams, then this parameter can be left to the (by-default) value of 0,
so that no ecm_id shifting is performed for ECM streams created by
the secondary APEX device.
Range: 0 – 20000
To Next Page
Loading...
