B
Appendix C • Initialization Information
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
299
573408-001-a
#----------------------------------------------------------
---------
/bootdir/apex/02_00.001/gigeapp.bin
/gigeapp/Gigeapp.img
/bootdir/apex/02_00.001/gigeboot.bin
/gigeboot/Gigeboot.img
Reference Specifications
To support BOOTP, the APEX1000 conforms to the following RFC specifications:
• Dynamic Host Configuration Protocol, RFC 2131
• DHCP Options and BOOTP Vendor Extensions, RFC 2132
• Bootstrap Protocol, RFC 951
• Clarifications and Extensions for the Bootstrap Protocol, RFC 1542
Refer to these specifications for complete information on the BOOTP packet format and
field descriptions.
To Next Page
Loading...
