Muratec F-525 - Clearing the Memory Switches

3-50
3.3.2 Clearing the Memory Switches
Resets the memory switches to factory defaults.
1. From standby, press <Setting>, <*>, <0>, <1>.
2. Press [Mem Switch Clear].
3. Press [Yes]. The memory switches will reset to factory defaults.
Note: To finish the operation without clearing the switches, press [No].
4. Press <Reset> to return the machine to standby.
About the “” symbol at the list
The “” at the list indicates that you can set the switch respectively for the second phone line. See “3.25
Multi Line Settings” on page 3-141 for the setting.