Muratec F-525 - Touch Panel Adjustment

3-120
3.13.9 Touch panel adjustment
1. Press <Setting>, <*>, <1>, <1>, then select [Adjust Touch Panel].
2. Touch the lower left corner of the panel, and press <Start>.
3. Touch the upper right corner of the panel, and press <Start>.
4. Press <Reset> to exit the test mode.
3.13.10 Generate bell test
1. Press <Setting>, <*>, <1>, <1>, then select [Generate Bell Test].
2. The bell stars ringing.
3. Press <Stop> to stop.