Muratec F-525 - Led Test; Lcd Test

3-116
3.13.2 LED Test
1. Press <Setting>, <*>, <1>, <1>, then select [LED Test].
Pressing <Setting>, all LEDs will turn on.
Pressing <Setting> twice, all LEDs will turn off.
2. Press <Reset> to exit the test mode.
3.13.3 LCD Test
This mode displays two test patterns in LCD.
1. Press <Setting>, <*>, <1>, <1>, then select [LCD Test].
Pressing <Setting>, all dots turn on.
Next pressing <Setting>, all dots turn off.
2. Press <Reset> to exit the test mode.