Muratec F-525 User Manual

3-80
3.7.2 Clearing the Unique Switches
Resets the unique switches to factory defaults.
1. From standby, press <Setting>, <*>, <0>, <4>.
2. Press [Switch Clear].
3. Press [Yes]. The unique switches will reset to factory defaults.
Note: To finish the operation without clearing the switches, press [No].
4. Press [Reset] to return the machine to standby.
About the “” symbol at the list
The “” at the list indicates that you can set the switch respectively for the second phone line. See “3.25
Multi Line Settings” on page 3-141 for the setting.

Muratec F-525 Specifications

General

Brand	Muratec
Model	F-525
Category	All in One Printer
Language	English