3-165
3.31 Update the software
To update the software using your PC, you should follow the following steps:
1. Install the update application on your PC
2. Install the USB driver on your PC
3. Update the software using the PC
The installation is only necessary for the fist time.
In this manual, the details are described with Windows XP. The screen image may differ according to the
Windows version of the PC.
· Windows 98
· Windows 2000
· Windows XP
are available for the updating application.
Note: In the following conditions, update is not possible
• While the scanner is in use
• While printer is in use
• While transmitting
• While the machine memory is in use
3.31.1 Install the update application on PC
To update the software, first install the USB RomWrite application on your PC.
1. Double click the RomWriteSetup.exe icon and start up the Installer Program.
2. Install Shield comes up. Click [Next].
To Next Page
Loading...
Need help?
General
