Muratec F-525 User Manual

3-110
4. Select “ON” and press [Enter].
5. Select [Mail Address 1].
6. To send the service report to the Muratec customer service, press [Enter].
You may also edit the location and press [Enter].
7. To send the service report to another location, press [Mail Address 2]. Otherwise, skip to step 11.
8. Enter the e-mail address of the location using the numeric keypad.
9. Press [Enter] to save the setting.
10. To enter one more location, press [Mail Address 3], and repeat steps 8 and 9.
11. Press <Reset> to go back to the stand by mode.
3.10 Monitor speaker
If you need to monitor the signal of fax communication, turn this mode to on. You can hear the signal
sound with machine’s speaker during fax transaction.
1. From standby mode, press <Setting>, <*>, <0>, <8>
.
2. Press [On], and [Enter] to turn the mode on.
Note: To turn this mode off, perform step 1 and 2 by selecting [Off].

Muratec F-525 Specifications

General

Brand	Muratec
Model	F-525
Category	All in One Printer
Language	English