3-141
3.25 Multi Line Settings
This setting makes it possible to set the following menu for the optional second line:
•
Memory Switches
• Unique Switches
• ECM mode
• Dialing Pause
• Number of Rings
Note: To set the second line, it is necessary that the Unique Switch 096 bit 6 is set to “On (1)” in
advance.
1. Press <Setting>, <*>, <2>, <8>.
2. Select [Memory switch].
See “3.3 Memory Switch Adjustment” from page 3-49 if necessary. You will see a “” mark on the
list for switches available to set respectively for the second phone line.
3. Press [Enter] to save the setting.
4. Select [Uniq Switch].
See “3.7 Unique Switch Adjustment” from page 3-79, if necessary. You will see a “” mark on the
list for switches available to set respectively for the second phone line.
5. Press [Enter] to save the setting.
To Next Page
Loading...
Need help?
General
