3-142
6. Select [EMC Mode].
7. Select the ECM mode for the second line.
8. Press [Enter] to save the setting.
9. Select [Dialing Pause].
10. Enter the dialing pause for the second phone line using the cursor key or the numeric keypad.
11. Press [Enter] to save the setting.
12. Select [Number of Rings].
13. Enter the number of rings for the second phone line using the cursor key or the numeric keypad.
14. Press [Enter] to save the setting.
15. Press <Reset> to go back to the stand by mode.
To Next Page
