Muratec F-525 User Manual

2-17
2.8.2 Sensor Descriptions
The following table gives a brief description of each sensor and its function.
Code Name Detects Sensor Type Remarks
DS1 Document sensor 1 Presence of document in
feeder
Photo
interrupter
DS2 Document sensor 2 Leading and trailing edge of
document
Photo
interrupter
APS ADF permit sensor Platen cover quite close or
not
Photo
interrupter
HS Mirror carriage home
position sensor
Mirror carriage position Photo
interrupter
TXIL(ADF) Interlock switch
(ADF)
Scanner cover open or close Mechanical
Switch
Cover-SW --- Detects front cover and the
1st cassette jam access cover
are open or close
Mechanical
Switch
PDS Paper discharge sen-
sor
Detects paper pass at paper
exit.
Photo
interrupter
DPS Duplex paper sensor Detects paper pass of the
duplex printing paper
Photo
interrupter
MFX-2050 /
1450 only
Thermistor ---- Detects and controls the
Heater Roller temperature
Thermistor
OPEN1 Paper cassette open
sensor
Detects the 1st paper
cassette open or close
Photo
interrupter
PES Paper empty sensor Detects presence of recording
paper in the 1st paper
cassette
Photo
interrupter
TS1 Toner sensor 1 Detects the toner empty for
small capacity toner cartridge
Photo
interrupter
TS2 Toner sensor Detects the toner empty for
large capacity toner cartridge
Photo
interrupter
PSS Paper supply sensor Detects paper feeding out of
cassette/tray
Photo
interrupter
TRAYS Tray sensor Detects presence of recording
paper in the bypass tray
Photo
interrupter
JAMC1 Jam access cover
sensor
Detects the side cover open
or close
Photo
interrupter
PES2 Paper empty sensor Detects presence of recording
paper in the 2nd paper cassette
Photo interrupter
OPEN2 Paper cassette open
sensor
Detects the 2nd paper cassette
open or close
Photo interrupter
JAMC2 Jam access cover
sensor
Detects the 2nd paper cassette
side cover open or close
Photo interrupter

Muratec F-525 Specifications

General

Brand	Muratec
Model	F-525
Category	All in One Printer
Language	English